JGW-D1504460-v5

DocDB Home ]  [ Search ] [ Recent Changes ]

RF Distribution Amplifier Top Assembly

Document #:
JGW-D1504460-v5
Document type:
D
Submitted by:
Yuta Michimura
Updated by:
Yuta Michimura
Document Created:
02 Nov 2015, 13:16
Contents Revised:
14 Nov 2016, 13:19
DB Info Revised:
14 Nov 2016, 13:19
Viewable by:
Modifiable by:
Other Versions:
JGW-D1504460-v4
14 Nov 2016, 13:14
JGW-D1504460-v3
14 Nov 2016, 12:44
JGW-D1504460-v2
16 Dec 2015, 15:57
JGW-D1504460-v1
16 Dec 2015, 11:57
JGW-D1504460-v0
16 Dec 2015, 10:52
Abstract:
Assembly drawing for RF Distribution Amplifier

Basically copy of LIGO-D1000124.
https://dcc.ligo.org/LIGO-D1000124/public
https://awiki.ligo-wa.caltech.edu/aLIGO/RfDistributionAmplifier1U

== v2 ==
For iKAGRA, it consists from Mini Circuits ZHL-1A-S+ (amp) and ZCSC-8-1-S+ (8way splitter).
http://www.minicircuits.com/pdfs/ZHL-1A.pdf
http://www.minicircuits.com/pdfs/ZCSC-8-1+.pdf

+-24V DC power is supplied from the back panel for the RF amp.

ZHL-1A-S+ is too tall for 1U chassis. So, we don't close the top. This RF amp will be replaced to Wenzel LNBA-11-23-CK with +-15V power supply in the future.

== v4 ==
For bKAGRA phase 1, we use LNBA-11-23-CK instead of ZHL-1A-S+ for the amp.
+-24 DC power is supplied from the back panel, and +- 15V is created using Chassis Power Regulator Board (JGW-D1301557).
RF interface for the monitor is not installed at this point.
Files in Document:
Keywords:
MIF IOO ISC RF AEL
DocDB Home ]  [ Search ] [ Recent Changes ]

DocDB Version 8.7.10, contact Document Database Administrators